Broken trunk of an Aluminum Tree
Posted: Tue Jan 06, 2015 7:43 am
A reader writes:
We have an aluminum christmas tree that was my wife's grandmother's. It has the base that turns as well as the color wheel and all. However, the silver painted wooden pole broke this year and I've having a tough time finding where I can buy just the wooden pole. Do you know of any place? I haven't measured but it's 4ft tall at least.
----Our reply-----------
I'm forwarding your note to a friend who runs the Noellkat vintage Christmas decoration store on Etsy. He knows way more than I do about these things. I'll also hazard and "educated guess" or two.
There were a number of manufacturers, as well as a number of different sizes. So you might have trouble matching the size of the pole, but even if you got a pole the right size from, say, a damaged set, it might not have the right size or number of holes for your "branches." Fred may have more specifics, but it should be possible to buy a dowell the right size from a lumber or hardware store (a flagpole, maybe), then study the pattern of all the little holes in your old pole, get out a hand drill, and try to match that with the new pole. The hardest part of that might be getting the holes in the correct angle so your branches stick out evenly. So you might want to try a row or two and see if you're getting close before you drill the whole thing.
Sorry I can't be more specific. Best of luck with your tree - Paul
We have an aluminum christmas tree that was my wife's grandmother's. It has the base that turns as well as the color wheel and all. However, the silver painted wooden pole broke this year and I've having a tough time finding where I can buy just the wooden pole. Do you know of any place? I haven't measured but it's 4ft tall at least.
----Our reply-----------
I'm forwarding your note to a friend who runs the Noellkat vintage Christmas decoration store on Etsy. He knows way more than I do about these things. I'll also hazard and "educated guess" or two.
There were a number of manufacturers, as well as a number of different sizes. So you might have trouble matching the size of the pole, but even if you got a pole the right size from, say, a damaged set, it might not have the right size or number of holes for your "branches." Fred may have more specifics, but it should be possible to buy a dowell the right size from a lumber or hardware store (a flagpole, maybe), then study the pattern of all the little holes in your old pole, get out a hand drill, and try to match that with the new pole. The hardest part of that might be getting the holes in the correct angle so your branches stick out evenly. So you might want to try a row or two and see if you're getting close before you drill the whole thing.
Sorry I can't be more specific. Best of luck with your tree - Paul